
The AirTAC SE63 Standard Cylinder SE63X110S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 110mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X110S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion.
Equipped with a built-in magnet (S option), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The integrated air cushions at both ends are field-adjustable, allowing technicians to tune deceleration and soften hard mechanical stops during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X110S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force needed to deflect heavy wooden pallets on a sorting line, utilizing the 110 mm stroke to clear the conveying lane quickly.
Drives mechanical arms to fold corrugated cardboard flaps prior to sealing, where the adjustable cushion ensures gentle deceleration to prevent tearing the board.
Mounts flush to eject plastic parts from molding machines, using the built-in magnet to trigger DMSE sensors that confirm the part has fully cleared the tool.
Choosing this 63 mm bore makes sense when a 50 mm cylinder (982 N push @0.5 MPa) is underpowered, but an 80 mm unit (2513 N push @0.5 MPa) is physically oversized. The PT3/8 port and 110 mm stroke hit a sweet spot for mid-range actuation. Because it shares the exact ISO 15552 mounting interface, it serves as a direct replacement for other standard profile cylinders without requiring custom brackets.
Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism. If your setup must hold a vertical load without live air pressure, you must integrate an external pilot-operated check valve or step up to a BSE rod-lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf when operated at the 1.0 MPa pressure limit.
Yes. The SE63X110S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing foot, flange, or trunnion mounts, but ensure your pneumatic plumbing matches the PT3/8 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.