
The AirTAC SE63 Standard Cylinder SE63X115S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 115mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X115S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push force at 0.5 MPa. Driven by a 63 mm bore and 115 mm stroke, it operates efficiently between 0.15 and 1.0 MPa with a speed range of 30-800 mm/s.
This variant includes a built-in magnet for non-contact position sensing using CMSE reed or DMSE electronic switches. The extruded aluminum barrel omits external tie rods for a flush, compact footprint, while field-adjustable air cushioning at both ends allows you to fine-tune end-of-stroke deceleration for moving loads.
| Model | Airtac SE63 Standard Cylinder SE63X115S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Routes plastic containers on a high-speed packaging line using 1559 N of push force at 0.5 MPa, with the -S magnet triggering DMSE sensors to confirm gate position.
Secures aluminum castings during machining via the 115 mm stroke, relying on adjustable pneumatic cushioning to prevent shock when releasing the clamp.
Halts unit loads on a gravity conveyor, utilizing the 1402 N retract force to pull the gate clear and the tie-rod-free profile to mount flush against the conveyor frame.
If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa; conversely, scaling up to the 80 mm bore provides 2513 N. This SE63X115S configuration features a PT3/8 port, a 20 mm rod, and the -S magnet option for CMSE or DMSE sensors. Being dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 profile cylinders without altering mounting hardware. Note that a plain double-acting cylinder drifts if air pressure is lost, so a load-holding application requires a BSE rod lock or external pilot-operated check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The 63 mm bore provides a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. This specific configuration uses a PT3/8 port.
No, a standard double-acting cylinder will drift downward if air pressure is lost or the valve is centered. The adjustable air cushion only decelerates the piston near the stroke end and does not function as a brake. For secure load holding, consider the AirTAC BSE series with a built-in rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.