Airtac SE63 Standard Cylinder SE63X1200FAFB
The AirTAC SE63 Standard Cylinder SE63X1200FAFB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke1200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63X1200FAFB
The AirTAC SE63X1200 is a double-acting single-rod ISO 15552 profile cylinder engineered for a 1200 mm stroke. It delivers a robust 1559 N push force at 0.5 MPa, making it well-suited for heavy-duty linear actuation tasks. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This unit features a PT3/8 port and a Ø20 mm piston rod with an M16x1.5 thread. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, softening hard impacts during high-speed operations. This specific SKU is configured with an FA front flange mounting accessory and ships without a built-in sensor magnet, relying solely on its mechanical travel.
Airtac SE63 Standard Cylinder SE63X1200FAFB Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63X1200FAFB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63X1200FAFB
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63X1200FAFB Is Used
Pallet Transfer Pusher
Uses the 1559 N push force to index heavy wooden pallets along a roller conveyor over the full 1200 mm stroke.
Stamping Press Loader
Feeds sheet metal blanks into a mechanical press, relying on the FA front flange to handle high axial loading.
Automated Storage Retriever
Extracts totes from high-density shelving units, utilizing the long stroke to reach deep into storage racking.
Is the Airtac SE63 Standard Cylinder SE63X1200FAFB the Right Cylinder?
When sizing this 63 mm bore actuator, evaluate if the 1559 N push at 0.5 MPa exceeds your actual load requirements. Stepping down to the 50 mm bore reduces the push to 982 N, saving space and air consumption. If your application demands significantly more thrust, stepping up to the 80 mm bore provides 2513 N of push force. Because this model lacks a built-in magnet, position sensing via CMSE or DMSE switches is not possible without modification; if you require end-of-stroke feedback, select an SE variant with the -S option.
At 1200 mm of travel, the unsupported piston rod is highly susceptible to bending under side loads. To prevent premature rod-bearing wear and seal failure, you must guide the load externally using linear rails or a dedicated slide mechanism. Note that this is a standard double-acting cylinder; the adjustable air cushion only decelerates the piston near the stroke ends and cannot hold a load vertically if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63X1200FAFB FAQ
This 63 mm bore cylinder has a standard 1200 mm stroke. At 0.5 MPa it provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa the push force increases to 2182 N, and it reaches a maximum push of 318 kgf at 1.0 MPa.
Yes, the SE63X1200 is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 standard cylinders. The extruded aluminum barrel has no external tie rods, simplifying retrofit and mounting hardware compatibility.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63X1200FAFB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.