verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X1200S

The AirTAC SE63 Standard Cylinder SE63X1200S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke1200 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$257.72 $265.22Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X1200S

The AirTAC SE63X1200S is a double-acting single-rod ISO 15552 profile cylinder engineered for long-stroke actuation, delivering a robust 1559 N push at 0.5 MPa. Its extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The built-in magnet enables seamless position detection using AirTAC CMSE reed or DMSE electronic switches.

Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling heavy loads at speed. Operating at 0.15-1.0 MPa with a PT3/8 port and a 20 mm piston rod, this 1200 mm stroke unit is built for demanding linear transfer tasks.

Airtac SE63 Standard Cylinder SE63X1200S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X1200S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke1200 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X1200S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×1200Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X1200S Is Used

conveyor_belt

Automotive Skid Transfer

Drives a 1200 mm stroke to push heavy automotive skids between welding cells, utilizing the 1559 N push force to overcome initial rolling friction.

package_2

Palletizer Layer Pusher

Sweeps complete product layers onto outbound pallets, relying on the adjustable pneumatic cushion to decelerate the 63 mm bore smoothly at stroke end.

warehouse

Cold Storage Retrieval

Actuates long-reach extraction arms in automated storage systems, using the built-in magnet with DMSE electronic sensors for precise position feedback.

Is the Airtac SE63 Standard Cylinder SE63X1200S the Right Cylinder?

Selecting this 63 mm bore makes sense when you need 1559 N push at 0.5 MPa. If your payload is lighter, stepping down to the 50 mm bore yields 982 N push, whereas moving up to the 80 mm bore provides 2513 N push for heavier dynamics. Because this model features a 1200 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads; always incorporate an external linear guide to prevent rod-bearing damage.

As a standard ISO 15552 profile cylinder, the SE63X1200S is dimensionally interchangeable with other ISO 15552 cylinders, allowing a direct replacement using existing mounting hardware. Note that the adjustable air cushion only decelerates the piston near stroke end and does not lock the rod; if your application must hold a load vertically without live air pressure, pair this cylinder with a BSE rod lock or an external pilot-operated check valve.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X1200S FAQ

The 63 mm bore generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N. The maximum rated push force is 318 kgf at 1.0 MPa.

Yes, the SE63X1200S adheres strictly to the ISO 15552 / VDMA 24562 mounting interface, meaning it is dimensionally interchangeable with other ISO 15552 profile cylinders and shares standard mounting accessories.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X1200S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X1200S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.