
The AirTAC SE63 Standard Cylinder SE63X125S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 125mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X125S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush within tight machine frames. The included -S magnet enables seamless position feedback using AirTAC CMSE reed or DMSE electronic sensors.
Field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s. Because it adheres to the ISO 15552 / VDMA 24562 interface, this 63 mm bore unit serves as a dimensionally interchangeable direct replacement for any compliant global cylinder.
| Model | Airtac SE63 Standard Cylinder SE63X125S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of push at 0.5 MPa to reliably fold and seal corrugated carton flaps on high-speed packaging lines, utilizing the -S magnet for DMSE timing.
Actuates a routing gate along a conveyor belt, using the 125 mm stroke to push heavy pallets laterally onto secondary processing tracks.
Secures raw aluminum castings inside a CNC machining center, applying up to 318 kgf of clamping force at 1.0 MPa without slipping during aggressive milling.
If your application requires slightly less thrust, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa. Conversely, moving up to the 80 mm bore provides 2513 N of push at 0.5 MPa for heavier payloads. To match this ISO 15552 footprint, specify the 63 mm bore, 125 mm stroke, PT3/8 port, and the -S magnet for sensor readiness. Note that a plain SE cylinder will drift if air pressure is lost; for position holding, consider the BSE rod-lock variant. Since the 125 mm stroke is below the 300 mm threshold, side-load stress on the M16x1.5 threaded rod remains moderate, though external guides are recommended for heavy lateral loads.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X125S features a 20 mm rod with an M16x1.5 thread. It generates 1559 N of push and 1402 N of pull at 0.5 MPa, 2182 N of push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa.
Yes, it is dimensionally interchangeable with any ISO 15552 profile cylinder. However, it is double-acting only; the adjustable air cushion decelerates the piston near stroke ends but does not hold the load if air is lost. For holding, use a BSE variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.