
The AirTAC SE63 Standard Cylinder SE63X125SCA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 125mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X125SCA is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. It features a 63 mm bore, a 125 mm stroke, and a robust CA single clevis mounting interface designed for articulated pivoting loads.
Its square extruded aluminum barrel eliminates external tie rods, resulting in a compact, corrosion-resistant body that mounts flush while resisting environmental debris. The integrated -S magnet enables precise position detection with AirTAC CMSE reed or DMSE electronic sensors, and the field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration for fast-moving pivoting assemblies.
| Model | Airtac SE63 Standard Cylinder SE63X125SCA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the CA clevis to pivot a heavy lane-deflector gate, utilizing the 1559 N push force at 0.5 MPa to reliably shift 63 mm bore products between sorting channels.
Drives a pivoting raw-material feed arm into a mechanical press, relying on the 125 mm stroke and adjustable end-cushions to soften impact during rapid 30-800 mm/s cycles.
Applies downward clamping pressure through a hinged jig, using the 1402 N pull force to hold composite wood panels steady while adhesive cures.
If your pivot application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, whereas stepping up to the 80 mm bore provides 2513 N for heavier articulating loads. Because this is a standard double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered; for static holding requirements, consider the BSE rod lock series. The CA clevis mount pairs perfectly with the PT3/8 port and M16x1.5 rod thread for reliable sway control.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X125SCA features a 63 mm bore and uses a PT3/8 port. At 0.5 MPa it provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa the push force is 2182 N, and the maximum push force is 318 kgf at 1.0 MPa.
Yes, its standardized ISO 15552 mounting dimensions make it a direct replacement for other ISO 15552 profile cylinders. However, it is a standard double-acting cylinder, so the adjustable air cushion only decelerates the piston near stroke end; it does not act as a brake or lock, meaning the load will drift if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.