verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X1300

The AirTAC SE63 Standard Cylinder SE63X1300 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1300mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke1300 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$270.55 $278.05Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X1300

The AirTAC SE63X1300 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push at 0.5 MPa. Its extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This clean profile simplifies fabrication while maintaining the rigorous ISO 15552 mounting footprint.

This 1300 mm stroke unit features field-adjustable air cushioning at both ends to tame kinetic energy near the endcaps. Because this specific SKU lacks the -S magnet option, it does not support direct CMSE or DMSE position sensing without modification. The 36 mm cushion length and PT3/8 porting ensure sufficient flow and deceleration for heavy-duty cycling.

Airtac SE63 Standard Cylinder SE63X1300 Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X1300
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke1300 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X1300

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×1300Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X1300 Is Used

conveyor_belt

Pallet Transfer Pusher

Uses the full 1300 mm stroke and 1559 N push to index heavy pallets between roller conveyor lanes in automated distribution hubs.

packaging

Large Carton Erector

Deploys the long stroke to unfold and square large corrugated cardboard blanks, relying on the 36 mm cushion to soften the end stop.

factory

Textile Beam Lifter

Raises heavy fabric beams into weaving looms, utilizing the 63 mm bore's 318 kgf maximum output to elevate the load smoothly.

Is the Airtac SE63 Standard Cylinder SE63X1300 the Right Cylinder?

Choosing this 63 mm bore provides 1559 N of push force at 0.5 MPa. If your application requires less energy, the adjacent 50 mm bore offers 982 N; stepping up to the 80 mm bore yields 2513 N for heavier loads. At 1300 mm of stroke, the 20 mm rod is highly susceptible to side-load bending and rod-bearing wear—an external linear guide is strictly required to prevent premature seal failure.

As a true ISO 15552 profile cylinder, the SE63X1300 serves as a direct replacement for other ISO 15552 cylinders, matching standard mounting hardware like FA front flanges or TC trunnions. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure drops. For position holding, explore the BSE rod lock variant or an external pilot-operated check valve.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X1300 FAQ

The 63 mm bore provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It features a PT3/8 port and a 20 mm hard-chrome rod.

Yes, its square profile barrel is dimensionally interchangeable with other ISO 15552 cylinders, sharing standard mounting dimensions. However, the adjustable air cushion only decelerates the piston; it does not lock or hold the load when air is lost, so a BSE rod lock is needed for position holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X1300

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X1300 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.