
The AirTAC SE63 Standard Cylinder SE63X130S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 130mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X130S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force and 1402 N of pull force at 0.5 MPa. Driven by a 63 mm bore and 130 mm stroke, it operates efficiently at speeds of 30-800 mm/s. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 interface dimensions for seamless retrofits.
This specific unit includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors, which track the piston along the 130 mm travel. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard mechanical impacts during high-speed cycling without relying on fixed rubber bumpers.
| Model | Airtac SE63 Standard Cylinder SE63X130S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanisms on continuous-motion packaging lines, utilizing the 1559 N push force to snap heavy cardboard carton flaps securely into place.
Actuates routing gates on roller conveyors, relying on the 130 mm stroke and adjustable end-cushions to shift loaded pallets smoothly without structural shock.
Ejects formed plastic parts from injection molds, using the integrated -S magnet and DMSE sensors to confirm full rod extension before the mold closes.
Choosing this 63 mm bore makes sense when your load demands the 1559 N push at 0.5 MPa that it provides. If your application is lighter, stepping down to the 50 mm bore yields 982 N of push force, whereas upgrading to the 80 mm bore provides a substantial 2513 N of thrust for heavier mechanisms. Because this is a double-acting cylinder, it relies on continuous live air pressure to move and cannot hold a load statically if air is exhausted or a valve centers; for fail-safe position holding, consider the BSE rod lock variant or an external pilot-operated check valve.
For ISO 15552 dimensional interchangeability, match the 63 mm bore, 130 mm stroke, PT3/8 port, and your chosen mounting accessory (such as an FA front flange or TC trunnion). The -S magnet code ensures the body is ready for CMSE and DMSE sensor installation.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X130S generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63X130S is dimensionally interchangeable with other ISO 15552 profile cylinders. You can drop it into existing setups using the same 63 mm bore, 130 mm stroke, PT3/8 port, and standardized mounting hardware without needing to redesign the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.