
The AirTAC SE63 Standard Cylinder SE63X1320S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1320mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1320S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 1320 mm stroke, requiring a made-to-order configuration. It delivers a robust 1559 N push force at 0.5 MPa and integrates a built-in magnetic piston for position sensing. Its square extruded aluminum barrel eliminates external tie rods, yielding a highly corrosion-resistant body that mounts flush against machine frames to save valuable space.
Because this unit exceeds the 1500 mm maximum standard stroke for a 63 mm bore, it is manufactured as a non-standard model. It features field-adjustable pneumatic cushioning at both ends to decelerate the piston smoothly, and its -S magnet enables precise detection via AirTAC CMSE reed or DMSE electronic sensors.
| Model | Airtac SE63 Standard Cylinder SE63X1320S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1320 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1320 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a 1320 mm stroke to push heavy pallets between roller conveyor sections, utilizing the 1559 N push force to overcome initial rolling resistance.
Actuates the folding mechanism for oversized corrugated boxes, where the 63 mm bore provides the necessary power and the -S magnet triggers cycle completion.
Advances long bar stock into a turning center, relying on the ISO 15552 mounting interface and a built-in DMSE sensor for precise material positioning.
This 63 mm bore generates 1559 N of push force at 0.5 MPa. If your application requires less force, the 50 mm bore offers 982 N of push, while stepping up to the 80 mm bore provides 2513 N for heavier loads. At 1320 mm of travel, the unsupported piston rod is highly susceptible to bending under side loads; you must use an external guide to prevent rod-bearing damage.
As a standard ISO 15552 profile cylinder, this model serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing standard PT3/8 ports and mounting hardware. Note that the adjustable air cushion only decelerates the piston near stroke end and does not hold a load; if air pressure drops, the piston will drift. For position holding without live pressure, consider the BSE rod lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder features a PT3/8 port and generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, and it reaches a maximum push of 318 kgf at 1.0 MPa.
Yes, the SE series is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and hardware dimensions as other standard ISO 15552 profile cylinders. The built-in -S magnet also works seamlessly with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.