verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X140S

The AirTAC SE63 Standard Cylinder SE63X140S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 140mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke140 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$96.07 $103.57Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X140S

The AirTAC SE63X140S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Driven by a 63 mm bore and 140 mm stroke, it features a square extruded aluminum barrel that eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.

This specific unit includes a built-in magnet (-S) for position sensing with AirTAC CMSE (reed) and DMSE (electronic) switches. To protect payloads at high cycling speeds, it relies on a field-adjustable air cushion at both ends, allowing technicians to dial in end-of-stroke deceleration via a simple screw rather than absorbing shock with a fixed bumper.

Airtac SE63 Standard Cylinder SE63X140S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X140S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke140 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X140S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×140Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X140S Is Used

precision_manufacturing

CNC Pallet Clamping

Provides 1559 N of extend force at 0.5 MPa to secure aluminum machining pallets onto vertical milling centers, utilizing the 140 mm stroke to clear the work envelope during part changes.

packaging

Carton Flap Folding

Drives mechanical folding arms on continuous-motion packaging lines, using the adjustable end cushions to soften the stroke and prevent crushing corrugated board at high speeds.

conveyor_belt

Belt Divert Gate

Actuates routing gates on parcel sortation conveyors, where the integrated -S magnet triggers DMSE electronic sensors to confirm gate position before downstream logistics routing.

Is the Airtac SE63 Standard Cylinder SE63X140S the Right Cylinder?

At 0.5 MPa, this 63 mm bore generates 1559 N of push force. If your machine requires less clamping pressure, stepping down to the 50 mm bore yields 982 N of push. For heavier actuation demands, scaling up to the 80 mm bore provides 2513 N of thrust. Because the 140 mm stroke is well below the 300 mm threshold, side-load stress on the M16x1.5 rod thread is minimal, though long unsupported loads still require an external guide.

When retrofitting an existing fixture, match the 63 mm bore, 140 mm stroke, PT3/8 port, and your required mounting accessory. The standardized ISO 15552 mounting interface makes this cylinder dimensionally interchangeable with other ISO 15552 profile cylinders. Remember that a plain SE cylinder will drift if air pressure is lost; if your process requires position holding without live pressure, consider the BSE rod lock variant.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X140S FAQ

At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE63X140S is dimensionally interchangeable per the ISO 15552 / VDMA 24562 standard. You can drop it into existing mounting hardware matching the 63 mm bore and 140 mm stroke. Just ensure your air lines match the PT3/8 port.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X140S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X140S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.