
The AirTAC SE63 Standard Cylinder SE63X145 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 145mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X145 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. This design simplifies retrofitting into existing ISO 15552 footprints without custom hardware.
This 63 mm bore unit features a 20 mm hard-chrome plated rod, an M16x1.5 rod-end thread, and a PT3/8 port. Because this specific SKU lacks the -S magnet suffix, it does not support CMSE or DMSE electronic position sensing out of the box. Field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X145 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates routing arms on 24V DC conveyor lines, using the 1559 N push force to redirect heavy pallets without rebounding.
Folds and secures corrugated cardboard flaps during automated box forming, relying on the 145 mm stroke for precise mechanical reach.
Drives secondary ejector pins to clear molded plastic parts from static dies, utilizing the adjustable cushion to protect delicate product surfaces.
Selecting the SE63X145 is optimal when your application requires roughly 1559 N of push force at 0.5 MPa. If your load is lighter, stepping down to the 50 mm bore yields 982 N of push, conserving air volume. For heavier payloads, the 80 mm bore provides 2513 N. Remember that a standard double-acting cylinder drifts when air pressure is lost or the valve centers; if the 145 mm stroke must hold a vertical load safely without live pressure, integrate an external pilot-operated check valve or specify the BSE rod-lock variant. Since this model uses a PT3/8 port and basic mounting, ensure you pair it with the correct ISO 15552 mounting accessories for your load trajectory.
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with an absolute maximum push capacity of 318 kgf at 1.0 MPa. The standard operating speed ranges from 30-800 mm/s.
Yes. The SE63X145 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, reusing existing mounting hardware like FA front flanges or LB foot brackets without redrilling.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.