
The AirTAC SE63 Standard Cylinder SE63X1500H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1500H is a double-acting single-rod ISO 15552 profile cylinder engineered for extreme stroke lengths and high-temperature environments. Utilizing a 63 mm bore, it delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull force, making it well-suited for heavy-duty positioning tasks. The H designation indicates an FKM (Viton) seal, extending the operating temperature range up to 150 C for demanding thermal exposures.
This unit features a clean extruded aluminum barrel without external tie rods, which streamlines mounting flush against machine frames and resists corrosion. Although this specific SKU lacks the S magnet for CMSE or DMSE position sensing, it retains the integrated sensor grooves on three sides of the body for future retrofit flexibility. The field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening impacts even at the extended 1500 mm travel distance.
| Model | Airtac SE63 Standard Cylinder SE63X1500H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates the extended reach of a MIG welding manipulator where ambient radiant heat requires the 150 C FKM seal, utilizing the 1559 N push to maintain steady torch positioning.
Drives a 1500 mm stroke transfer carriage on a high-speed packaging line, moving heavy goods between belt sections while the adjustable cushion absorbs kinetic energy at the ends.
Pushes deflectors on a glass container forming machine, where the FKM Viton seals survive direct proximity to radiant heat and the 63 mm bore provides reliable 1402 N retract force.
Selecting this 63 mm bore involves sizing against its neighbors: stepping down to a 50 mm bore yields 982 N push at 0.5 MPa, while stepping up to an 80 mm bore provides 2513 N. This SE63X1500H occupies a strong middle ground for applications needing 1559 N push and 1402 N pull at 0.5 MPa. Because it carries a 1500 mm stroke, the 20 mm rod and rod-end bearing face significant bending moments under side loads; an external guide mechanism is essential to prevent premature seal wear and piston scoring.
As a true ISO 15552 profile cylinder, it offers a direct dimensional replacement for other ISO 15552 cylinders, sharing standardized PT3/8 ports and a 36 mm cushion length. Note that the adjustable air cushion only decelerates the piston near stroke end—it is not a locking mechanism. If the machinery loses air pressure or the valve centers, the load will drift; maintaining a suspended load requires a BSE rod lock or an external pilot-operated check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, and the maximum push capacity is 318 kgf at 1.0 MPa. Thanks to the FKM seal, it operates in temperatures from 0 to 150 C, with a speed range of 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, meaning it serves as a direct replacement for other standard ISO 15552 profile cylinders using the same PT3/8 ports and mounting hardware. However, it does not hold position naturally; if air is lost, the load will drift, requiring a BSE rod lock for secure vertical holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.