
The AirTAC SE63 Standard Cylinder SE63X15CA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 15mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X15CA is a double-acting single-rod ISO 15552 profile cylinder engineered for compact linear motion. It delivers a robust 1559 N push force at 0.5 MPa and utilizes a PT3/8 port. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant exterior that mounts flush in tight machinery spaces.
This specific SKU includes a CA single clevis mount for pivoting articulation and lacks a built-in magnet, meaning it is not equipped for CMSE or DMSE position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration, softening mechanical impacts during rapid 30-800 mm/s cycles.
| Model | Airtac SE63 Standard Cylinder SE63X15CA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Ideal for actuating a hinged flow-diverter gate in packaging lines, where the CA clevis accommodates the arc of the pivot and the 1559 N force easily overcomes friction.
Executes rapid 15 mm stamping or embossing tasks in metal tag production, using its 30-800 mm/s speed and adjustable cushioning to prevent harsh end stops.
Drives a short pivoting deflector arm on a parcel conveyor, benefiting from the smooth no-tie-rod profile that prevents debris accumulation in dusty logistics hubs.
With a 1559 N push at 0.5 MPa, this 63 mm bore is a mid-range workhorse. If your project requires less force, the 50 mm bore offers 982 N push, while stepping up to the 80 mm bore provides 2513 N push for heavier displacement. The CA clevis is ideal for articulating mechanisms where the cylinder must pivot during travel. Remember that the adjustable air cushion only decelerates the piston near the stroke end; it is not a locking device, so loads will drift if air pressure is lost. Since the stroke is 15 mm, side-load stress on the rod bearing is minimal.
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force reaches 2182 N. The maximum allowable push force is 318 kgf at 1.0 MPa.
Yes, the SE63X15CA is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting interface and envelope as other standard profile cylinders. This allows for a direct retrofit using existing CA clevis hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.