
The AirTAC SE63 Standard Cylinder SE63X165 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 165mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X165 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant envelope that mounts flush against machine frames while protecting internal mechanics.
This 63 mm bore unit features a PT3/8 port and a 20 mm hard-chrome rod, operating at speeds from 30-800 mm/s. Field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration for moving loads. As this SKU lacks the -S magnet suffix, it is built for purely mechanical actuation without position sensing.
| Model | Airtac SE63 Standard Cylinder SE63X165 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Lowers capping chucks onto beverage containers with 1559 N of precise downward force, using the adjustable cushion to prevent impact damage to plastic threads.
Extends 165 mm to push heavy wooden pallets off a high-speed packaging line, relying on the tie-rod-free aluminum profile to resist workshop humidity.
Actuates heavy machine tool safety doors, utilizing the 20 mm rod to handle the weight and the ISO 15552 footprint to retrofit existing guide rails.
Selecting this 63 mm bore provides 1559 N of push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N push, while moving up to the 80 mm bore provides 2513 N push for heavier payloads. Because the 165 mm stroke is under 300 mm, side-load stress on the rod bearing is minimal, though external guides remain best practice for rigid lateral loads.
This model serves as a direct dimensional direct replacement for any standard ISO 15552 cylinder, matching the 63 mm footprint, 165 mm stroke, PT3/8 porting, and standard mounting accessories. Remember that a standard double-acting cylinder drifts when air pressure is removed or exhausted; if your process demands strict position holding under loss of pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
This specific SE63X165 SKU does not include a piston magnet, so it cannot host CMSE or DMSE position sensors without modifying the internal piston. Dimensionally, it is a true ISO 15552 profile cylinder, making it a direct replacement for any standard 63 mm bore ISO 15552 mounting interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.