
The AirTAC SE63 Standard Cylinder SE63X170 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 170mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X170 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This 63 mm bore unit features a 170 mm stroke and uses a PT3/8 port paired with a 20 mm piston rod. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration for moving loads, and because this specific SKU lacks the -S magnet, it arrives ready for mechanical actuation without position sensing.
| Model | Airtac SE63 Standard Cylinder SE63X170 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force needed to reroute heavy timber pallets on packaging lines without overwhelming the frame.
Utilizes its 170 mm stroke to slide heavy machine tool doors open and closed rapidly, with tunable cushions softening the impact.
Drives mechanical arms to tuck corrugated cardboard flaps at high cycling rates, relying on the 30-800 mm/s speed range.
Choosing this 63 mm bore makes sense when a 50 mm cylinder (982 N push @0.5 MPa) is underpowered, but an 80 mm unit (2513 N push @0.5 MPa) would be physically oversized. The 170 mm stroke falls within standard limits, and its PT3/8 porting integrates seamlessly with existing VDMA 24562 mounting accessories.
As a standard double-acting cylinder, it cannot hold a load in place if air pressure drops or the valve centers—the piston will drift. If your application requires static holding, consider the BSE rod-lock variant. Furthermore, while the 20 mm rod handles normal stresses, any stroke over 300 mm demands an external guide to prevent rod-bearing bending under side loads.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder outputs 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum rated push force is 318 kgf at 1.0 MPa.
Yes, the SE63X170 is dimensionally interchangeable with any standard ISO 15552 profile cylinder. You can swap it directly using existing mounting hardware and PT3/8 pneumatic connections without altering the machine footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.