
The AirTAC SE63 Standard Cylinder SE63X1700S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1700mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1700S is a double-acting single-rod ISO 15552 profile cylinder engineered for long-reach automation. It delivers a robust 1559 N push at 0.5 MPa, utilizing a 63 mm bore and a custom 1700 mm stroke that exceeds the standard 1500 mm maximum, making it a made-to-order solution for extended travel demands. The integrated -S magnet enables seamless position detection with AirTAC CMSE reed or DMSE electronic sensors.
Built with a square extruded aluminum barrel free of external tie rods, this profile body mounts flush against machine frames to resist corrosion and save space. Field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration, softening hard impacts when moving heavy loads across the 1.7-meter travel distance.
| Model | Airtac SE63 Standard Cylinder SE63X1700S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1700 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives large pallets down a 1.7-meter conveyor line, utilizing the 1559 N push force to overcome carton friction without stalling.
Raises and lowers heavy loading dock gates, relying on the 36 mm adjustable cushion to soften the impact at the top of the extended 1700 mm travel.
Shifts oversized packaging film rolls into position, using the -S magnet and DMSE sensors to confirm full extension across the long stroke.
Selecting this 63 mm bore yields 1559 N push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore provides 982 N push, while moving up to the 80 mm bore offers 2513 N push for heavier payloads. Because the 1700 mm stroke is non-standard, expect a made-to-order lead time. The PT3/8 port and M16x1.5 rod thread are fixed to this bore size.
At 1700 mm, the unsupported rod length is highly susceptible to bending under side loads; an external guide rail is mandatory to prevent rod-bearing damage. Note that the adjustable air cushion only decelerates the piston near stroke end and does not hold the load—if air pressure is lost, the cylinder will drift, requiring a BSE rod lock for secure positioning.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact mounting interface and footprint of other ISO 15552 profile cylinders for easy retrofitting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.