
The AirTAC SE63 Standard Cylinder SE63X175S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X175S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull force, making it well-suited for mid-weight industrial actuation. The extruded aluminum square barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in magnet (-S), this model directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Furthermore, the field-adjustable air cushioning at both ends allows technicians to dial in end-stop deceleration via a simple screw, softening impacts during high-speed operations.
| Model | Airtac SE63 Standard Cylinder SE63X175S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force required to cleanly fold and seal heavy corrugated carton flaps on high-speed packaging lines.
Secures heavy cast iron engine blocks during machining, utilizing the 36 mm cushion length to prevent harsh end-stop impacts.
Actuates a robust routing gate on a 175 mm stroke to redirect loaded pallets between parallel conveyor lanes.
When sizing this actuator, consider stepping down to a 50 mm bore if your load requires only 982 N of push force at 0.5 MPa, or moving up to an 80 mm bore if you need a significantly higher 2513 N thrust. Because this is a standard double-acting cylinder, it will not hold a load in place if air pressure is lost or the valve is centered; the piston will drift. For position-holding requirements, explore the BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for any standard ISO 15552 unit, utilizing standard mounting accessories and a PT3/8 port.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder delivers 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE63X175S is dimensionally interchangeable per ISO 15552 standards, allowing it to drop into existing footprints using standard mounting hardware. The -S magnet also enables direct fitting of CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.