
The AirTAC SE63 Standard Cylinder SE63X1760 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1760mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1760 is a double-acting single-rod profile cylinder built to ISO 15552 standards, delivering a push force of 1559 N at 0.5 MPa. Its 1760 mm stroke is a non-standard, made-to-order length designed for extended reach operations. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This unit features field-adjustable air cushioning at both ends to decelerate the piston smoothly over its long travel. It operates without a position magnet, meaning external limit switches are required if end-of-stroke detection is needed. The integrated PT3/8 port and M16x1.5 rod thread provide robust pneumatic and mechanical connections for heavy-duty cycles.
| Model | Airtac SE63 Standard Cylinder SE63X1760 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1760 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1760 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes heavy pallets between processing stations over a 1760 mm span, utilizing the 1559 N push force to overcome friction without stalling.
Extends deep into racking to retrieve totes, where the 63 mm bore's 1402 N pull force reliably retracts the loaded carrier.
Actuates the primary positioning arm for wide packaging film rolls, relying on adjustable end cushions to stop the massive 1760 mm travel smoothly.
Selecting this 63 mm bore yields 1559 N push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore provides 982 N push; stepping up to the 80 mm bore offers 2513 N push for heavier loads. Because this is a plain cylinder, it cannot hold a load if air pressure drops—consider a BSE rod lock variant for fail-safe vertical holding.
At a 1760 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads. You must use an external guide rail to prevent rod-bearing damage. This model is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing direct retrofitting using standard mounting accessories like TC or LB brackets.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N push and 1402 N pull. At 0.7 MPa, the push increases to 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63X1760 is dimensionally interchangeable per ISO 15552 standards. You can use your existing mounting hardware and drop it in as a replacement, though note this specific SKU lacks a sensor magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.