
The AirTAC SE63 Standard Cylinder SE63X18 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 18mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X18 is a double-acting single-rod ISO 15552 profile cylinder engineered for short-stroke actuation. Operating at 0.5 MPa, it delivers 1559 N of push force and 1402 N of pull force, making it a robust choice for compact, high-force positioning tasks.
The extruded aluminum barrel omits external tie rods, yielding a clean profile that resists corrosion and mounts flush against machine frames. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during rapid 30-800 mm/s cycling. Note that this specific SKU lacks a built-in magnet, meaning CMSE or DMSE position sensors cannot be directly mounted.
| Model | Airtac SE63 Standard Cylinder SE63X18 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 18 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×18 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push force across an 18 mm stroke to positively eject dense plastic parts from an injection mold cavity without requiring a full-length rod.
Acts as a rigid, high-force backgauge stop in a sheet metal press brake, relying on the 20 mm rod diameter to absorb brief side loads during material indexing.
Executes rapid 18 mm tucks on heavy-gauge corrugated carton flaps, utilizing the 36 mm cushion length to decelerate the piston smoothly at high cycling speeds.
For short-stroke clamping or ejection, this 63 mm bore provides 1559 N of push at 0.5 MPa. If your fixture requires less force and a smaller footprint, stepping down to the 50 mm bore yields 982 N of push. Conversely, if you need to overpower heavy resistance, stepping up to the 80 mm bore provides 2513 N of push. Because this is a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing standardized mounting hardware and a PT3/8 port. Remember that a plain SE cylinder relies on live air pressure to hold its load; if pneumatic supply drops, the piston will drift and cannot maintain position.
Quick checklist
At 0.5 MPa, the SE63X18 provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the adjustable air cushion only decelerates the piston near the stroke ends and does not lock the rod. If air is exhausted, the piston will drift. For true load holding without live pressure, a BSE rod lock variant or external pilot-operated check valve is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.