
The AirTAC SE63 Standard Cylinder SE63X192S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 192mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X192S is a double-acting, single-rod profile cylinder built to ISO 15552 dimensions, delivering a robust 1559 N push force at 0.5 MPa. Its 192 mm stroke is a non-standard made-to-order length, providing exact travel for specialized machine movements without requiring spacers.
The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against frames and shrinks the overall machine envelope. Equipped with a built-in position magnet, this unit directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection.
| Model | Airtac SE63 Standard Cylinder SE63X192S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 192 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×192 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Routes heavy PET bottle crates on a packaging conveyor using the 1559 N push force and 192 mm stroke to actuate routing gates smoothly.
Opens and closes a heavy safety enclosure on a CNC turning center, utilizing the -S magnet to confirm the guard is fully closed before machining begins.
Folds major flaps on large corrugated cartons, relying on the field-adjustable air cushion to prevent hard impacts that could crush the board.
This 63 mm bore outputs 1559 N push at 0.5 MPa. If your application requires less force, the 50 mm bore offers 982 N push; if you need heavier thrust, stepping up to the 80 mm bore provides 2513 N push. Because the 192 mm stroke is non-standard, expect a made-to-order lead time. For direct retrofits, match the 63 mm bore, 192 mm stroke, PT3/8 port, and your required mounting accessory. Since the stroke is under 300 mm, side-load stress on the M16x1.5 rod thread is moderate, but an external guide remains best practice for rigid loads. Note that the adjustable air cushions decelerate the piston near end stops but do not lock the rod; if you must hold a load vertically without live air pressure, utilize a BSE rod lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The standard operating speed ranges from 30-800 mm/s.
Yes. The SE63X192S adheres strictly to ISO 15552 / VDMA 24562 mounting dimensions, making it dimensionally interchangeable with other ISO 15552 profile cylinders. You can reuse existing mounting hardware like FA front flanges or TC center trunnions without modifying the machine frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.