Airtac SE63 Standard Cylinder SE63X200CAY
The AirTAC SE63 Standard Cylinder SE63X200CAY is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63X200CAY
The AirTAC SE63X200CAY is a double-acting single-rod ISO 15552 profile cylinder delivering a robust 1559 N push force at 0.5 MPa. Built with a square extruded aluminum barrel that eliminates external tie rods, it offers a flush, corrosion-resistant body that simplifies mounting on modern machinery. The CA mounting accessory provides a single clevis pin interface perfectly suited for pivoting mechanisms.
This 63 mm bore unit operates at speeds from 30-800 mm/s and relies on a field-adjustable pneumatic cushion at both ends to decelerate the piston near stroke limits. Because this SKU lacks a built-in magnet, it does not support position sensing out of the box. The cushioning is a real adjustable air cushion, not a fixed rubber bumper, allowing precise tuning to soften hard end stops at high velocities.
Airtac SE63 Standard Cylinder SE63X200CAY Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63X200CAY |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63X200CAY
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63X200CAY Is Used
Pivoting Press Arm
Drives a 200 mm pivoting arm on a mechanical press using the CA clevis, utilizing the 1559 N push force to form light gauge sheet metal.
Sortation Diverter
Actuates a diverting flap on a packaging conveyor, where the 1402 N retract force reliably pushes cartons onto a secondary belt at 30-800 mm/s.
Assembly Indexer
Indexes a multi-station assembly dial table, using the adjustable end cushions to softly seat the mechanism without shock loading.
Is the Airtac SE63 Standard Cylinder SE63X200CAY the Right Cylinder?
Generating 1559 N of push at 0.5 MPa, this bore fits medium-duty pivoting tasks. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push, while moving up to the 80 mm bore provides 2513 N for heavier loads. Since this stroke is 200 mm, the 20 mm rod and M16x1.5 thread handle standard loads well, but long unsupported strokes exceeding 300 mm typically require an external guide to prevent rod-bearing bending.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, making it a seamless direct replacement for retrofits. Remember that a plain SE cylinder does not hold its load when air is exhausted or the valve is centered; the piston will drift. For position-holding needs, consider a BSE rod lock variant. This CA-mounted unit uses a PT3/8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63X200CAY FAQ
This 63 mm bore cylinder generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa.
It is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other ISO 15552 profile cylinders. However, it is a double-acting cylinder and does not hold its load when air is lost; the piston will drift without live pressure or an external rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63X200CAY
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.