Airtac SE63 Standard Cylinder SE63X200SY
The AirTAC SE63 Standard Cylinder SE63X200SY is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ63 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63X200SY
The AirTAC SE63X200SY is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks, delivering a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 dimensions for seamless retrofitting.
Equipped with a built-in magnet (-S), this unit seamlessly interfaces with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard end stops during high-speed 30-800 mm/s operations without acting as a position lock.
Airtac SE63 Standard Cylinder SE63X200SY Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63X200SY |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63X200SY
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63X200SY Is Used
Carton Erector Joints
Provides the 1559 N push force required to positively snap corrugated carton flaps into position during high-speed automated packaging lines.
Pallet Diverters
Uses the 200 mm stroke to push heavy pallets onto secondary processing lanes, benefiting from the no-tie-rod profile that prevents debris buildup.
CNC Door Actuators
Drives heavy machine tool safety doors, relying on the adjustable pneumatic cushion to soften end-of-stroke impacts at rapid transit speeds.
Is the Airtac SE63 Standard Cylinder SE63X200SY the Right Cylinder?
Generating 1559 N of push at 0.5 MPa, this 63 mm bore is a versatile mid-range workhorse. If your assembly requires less force, the 50 mm bore offers 982 N push, whereas stepping up to the 80 mm bore provides 2513 N for heavier loads. Remember that a standard SE cylinder will drift if air pressure is lost; for strict load-holding, consider the BSE rod-lock variant. To replace an existing ISO 15552 unit, match the 200 mm stroke, PT3/8 port, and mounting hardware, ensuring the -S magnet is specified for sensor integration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63X200SY FAQ
At 0.5 MPa, it generates 1559 N of push and 1402 N of pull. At 0.7 MPa, push increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63X200SY is dimensionally interchangeable per ISO 15552. The included -S magnet works directly with AirTAC CMSE reed and DMSE electronic sensors fitted into the barrel's three-sided grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63X200SY
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.