
The AirTAC SE63 Standard Cylinder SE63X20H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 20mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X20H is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-temperature pneumatics. It delivers a robust 1559 N push force at 0.5 MPa, utilizing a 63 mm bore and a 20 mm stroke. Fitted with a Viton (FKM) seal, this unit reliably operates in ambient temperatures up to 150 C, making it highly suitable for heated manufacturing environments where standard TPU seals would degrade and fail.
Unlike traditional tie-rod designs, the extruded aluminum barrel features a clean, compact profile with integrated sensor grooves on three sides. This barrel architecture not only resists corrosion but allows for flush mounting and easy modular additions. The unit includes field-adjustable pneumatic cushioning at both ends, allowing technicians to fine-tune end-of-stroke deceleration via a set screw to prevent hard mechanical impacts during rapid 30-800 mm/s cycling.
| Model | Airtac SE63 Standard Cylinder SE63X20H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Withstands ambient mold heat up to 150 C via its FKM seal, providing 1559 N of push force to eject plastic parts within a tight 20 mm stroke envelope.
Handles high-temperature ambient conditions near forging ovens, using its adjustable cushioning to gently decelerate the 30-800 mm/s cycle despite the harsh environment.
Secures heated plastic sheets with 1402 N pull force at 0.5 MPa, leveraging the corrosion-resistant extruded aluminum profile to survive hot, off-gassing production zones.
Selecting this 63 mm bore makes sense when your application requires substantial thrust—stepping down to a 50 mm bore yields 982 N push at 0.5 MPa, while stepping up to an 80 mm bore provides 2513 N. This specific SE63X20H configuration omits the built-in magnet (-S), meaning it cannot host CMSE or DMSE position sensors without modification; if your high-temp application requires electronic or reed switch feedback, you must select the -S variant. Furthermore, because a standard SE cylinder vents and drifts when air pressure is lost, it cannot hold a load mid-stroke—use a BSE rod lock for secure positioning.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders, sharing standardized mounting interfaces and hardware. It features a PT3/8 port and an M16x1.5 rod thread. Given the very short 20 mm stroke, side-load stress on the rod bearing is minimal, but always verify that your external load alignment is straight to prevent premature seal wear.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push force of 318 kgf at 1.0 MPa. Equipped with a Viton (FKM) seal, its operating temperature range extends from -20 C to 150 C.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders using the same mounting hardware. However, it is a double-acting air cylinder, not a rod lock; it will drift if air pressure is lost. For position holding, consider the BSE series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.