verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X250S

The AirTAC SE63 Standard Cylinder SE63X250S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 250mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke250 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$110.23 $117.73Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X250S

The AirTAC SE63X250S is a double-acting single-rod ISO 15552 profile cylinder with a 63 mm bore and 250 mm stroke. It generates 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa, making it a robust choice for medium-duty automation. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.

Because this unit includes the -S option, it has a built-in magnet ready for CMSE reed and DMSE electronic position sensors. The field-adjustable air cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, protecting the 36 mm cushion zone from hard impacts during high-speed 30-800 mm/s cycles.

Airtac SE63 Standard Cylinder SE63X250S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X250S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke250 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X250S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×250Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X250S Is Used

packaging

Carton Erector Flaps

Provides the 1559 N push force required to fold and square heavy corrugated carton flaps reliably during high-speed packaging line setup.

conveyor_belt

Pallet Divert Gate

Uses the 250 mm stroke to extend a diverter arm across a roller conveyor, redirecting heavy wooden pallets onto a secondary processing lane.

precision_manufacturing

CNC Fixture Clamp

Secures aluminum castings inside a machining center, applying consistent 1402 N retract force to prevent workpiece shift during milling operations.

Is the Airtac SE63 Standard Cylinder SE63X250S the Right Cylinder?

If your assembly requires less force, the 50 mm bore provides 982 N of push at 0.5 MPa; stepping up to the 80 mm bore yields 2513 N. This SE63X250S uses a PT3/8 port, a Ø20 mm rod with an M16x1.5 thread, and operates on filtered air at 0.15-1.0 MPa. At 250 mm of stroke, the unsupported piston rod is susceptible to bending under side loads, so incorporating an external guide rail is highly recommended.

It offers true ISO 15552 dimensional interchangeability, meaning it drops directly into existing footprints using standard LB, FA, or TC mounting hardware. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not lock the load. If your process must hold a vertical load without live air pressure, you need a BSE rod lock variant or an external pilot-operated check valve.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X250S FAQ

At 0.5 MPa, this 63 mm bore cylinder outputs 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE63X250S is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using standard mounting accessories. The built-in -S magnet also works seamlessly with AirTAC CMSE reed and DMSE electronic sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X250S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X250S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.