
The AirTAC SE63 Standard Cylinder SE63X253SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 253mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X253SN is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Driven by filtered air, it operates reliably between 0.15 and 1.0 MPa and features a 36 mm adjustable air cushion at both ends to smooth out high-speed end-of-stroke impacts. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting and sensor placement.
This specific configuration incorporates an NBR seal for standard temperature duties (-20 to +70 C) and a built-in magnet (-S) for non-contact position detection using AirTAC CMSE reed or DMSE electronic switches. With a PT3/8 port, a Ø20 mm hard-chrome rod, and an M16x1.5 rod-end thread, it provides a rigid, standardized interface for diverse automation tasks.
| Model | Airtac SE63 Standard Cylinder SE63X253SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 253 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×253 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates routing gates on high-speed PET bottling conveyors, utilizing the 253 mm stroke and 1559 N push to cleanly redirect heavy product flows between packaging lanes.
Provides the extended reach and consistent push force required to index raw steel stock into CNC lathe collets, relying on the NBR seal for longevity in oily environments.
Drives the folding arms on automated carton erectors, where the 36 mm adjustable cushion absorbs the kinetic energy of fast-moving packaging components at stroke end.
Generating 1559 N of thrust at 0.5 MPa, this 63 mm bore cylinder fits squarely between the 50 mm (982 N push) and 80 mm (2513 N push) frames, allowing you to step down for lighter duty or up for heavier loads. Because the 253 mm stroke exceeds the 300 mm threshold, the unsupported rod length increases the risk of bearing bending under lateral stress; integrating an external guide rail is recommended to absorb side loads and prevent premature wear. The NBR elastomer and PT3/8 ports are standard, but the built-in -S magnet means you can directly mount CMSE or DMSE sensors without further modification. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other standardized ISO 15552 cylinders, sharing identical mounting hardware and footprint. Note that the adjustable pneumatic cushioning only decelerates the piston near stroke end and does not hold a load if air pressure is lost.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
No, the SE63X253SN is a standard double-acting cylinder and will drift if air is lost or the valve is centered. The field-adjustable air cushion at both ends only decelerates the piston near the stroke limits; it is not a locking mechanism. For position holding, a BSE rod lock variant or external pilot-operated check valve is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.