
The AirTAC SE63 Standard Cylinder SE63X25FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 25mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X25FTC is a double-acting single-rod ISO 15552 profile cylinder engineered for compact actuation, delivering 1559 N of push force at 0.5 MPa. It features an FTC center trunnion mounting style and a 25 mm stroke, making it highly effective for pivoting mechanisms where space is restricted. The square extruded aluminum barrel lacks external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly to machine frames.
This unit relies on field-adjustable pneumatic cushioning at both ends to decelerate the piston near the stroke limits, ensuring smooth stops without harsh metal-on-metal impact. Because this specific SKU is supplied without a built-in magnet, it does not directly support AirTAC CMSE or DMSE position sensors out of the box.
| Model | Airtac SE63 Standard Cylinder SE63X25FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Generates 1559 N of push force at 0.5 MPa to secure heavy cast iron engine blocks during high-speed CNC milling operations.
Provides the rapid 25 mm stroke needed to actuate upper die hold-downs on a sheet metal press brake for bending thick steel plates.
Utilizes the FTC center trunnion mount to pivot a heavy mechanical gate, routing empty wooden pallets into an automated packaging line.
Selecting this 63 mm bore over the smaller 50 mm frame upgrades your 0.5 MPa push output from 982 N to 1559 N, while stepping up to the 80 mm bore provides 2513 N if your pivot dynamics demand more power. The FTC trunnion mount is ideal for applications requiring angular movement, but remember that a standard double-acting cylinder cannot hold a load if air pressure is lost; if your pivot mechanism must resist backdriving, consider adding a BSE rod lock or external check valve. Since the stroke is only 25 mm, side-load stress on the rod bearing is minimal compared to longer strokes.
Quick checklist
The 63 mm bore provides a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It uses a PT3/8 port and an M16x1.5 rod-end thread.
Yes, the SE profile cylinder is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 cylinders using the same FTC mounting hardware. This specific SKU does not include a built-in magnet, so it will not trigger AirTAC CMSE or DMSE sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.