
The AirTAC SE63 Standard Cylinder SE63X25H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 25mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X25H is a double-acting single-rod ISO 15552 profile cylinder engineered for high-temperature duty. Equipped with a Viton (FKM) seal, it withstands operating environments up to 150 C, significantly extending the standard -20 to +70 C range. In this 63 mm bore configuration, it generates 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa.
The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor placement. Although this specific SKU lacks a position-sensing magnet, the field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, protecting machinery from hard impacts even during rapid 30-800 mm/s cycles.
| Model | Airtac SE63 Standard Cylinder SE63X25H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Secures aluminum cast dies at 1559 N of clamping force where ambient temperatures would degrade standard TPU seals.
Provides a rapid 25 mm ejection stroke to release plastic trays from heated molds without marring the surface.
Delivers a fast, high-force 63 mm bore cut to severe hot runner gates, cycling at speeds up to 800 mm/s.
Selecting this 63 mm bore makes sense when a 50 mm cylinder (982 N push @0.5 MPa) is underpowered, but an 80 mm unit (2513 N push @0.5 MPa) is physically oversized. The short 25 mm stroke is optimal for high-force clamping or ejecting tasks where travel distance is minimal. Because the FKM seal handles 150 C, it is specifically suited for hot end-of-arm tooling or thermal processing zones.
As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement for other ISO 15552 profile cylinders, matching standard PT3/8 ports and M16x1.5 rod threads. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If your process requires position holding without live air pressure, integrate an external BSE rod lock or pilot-operated check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder outputs 1559 N of push and 1402 N of pull force. At 0.7 MPa, push increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. Thanks to the Viton (FKM) seal, it operates reliably from -20 to 150 C.
Yes, it is dimensionally interchangeable with any standard ISO 15552 profile cylinder, utilizing a PT3/8 port and M16x1.5 rod thread. However, this specific SKU does not have a built-in magnet, so it cannot support CMSE or DMSE position sensors without changing the piston assembly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.