
The AirTAC SE63 Standard Cylinder SE63X25S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 25mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X25S is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact actuation. It delivers a robust 1559 N push at 0.5 MPa, utilizing a 63 mm bore and a precise 25 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant housing that mounts cleanly in restricted spaces.
Equipped with a built-in magnetic piston (-S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for exact end-position detection. Field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, preventing harsh impact even during rapid 30-800 mm/s cycling.
| Model | Airtac SE63 Standard Cylinder SE63X25S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of secure clamping force to hold heavy cast iron engine blocks in place during high-speed CNC machining operations.
Uses the short 25 mm stroke to rapidly fold corrugated cardboard flaps on automated packaging lines prior to case sealing.
Acts as a precise, adjustable back-gauge stop in metal forming presses, leveraging the rigid profile barrel for repeatable positioning.
Selecting this 63 mm bore makes sense when a 50 mm cylinder's 982 N push is insufficient, but you want to avoid the bulk of an 80 mm unit that outputs 2513 N. The 25 mm stroke is optimal for short clamping or ejecting motions. If your process requires holding a load vertically without continuous air pressure, note that a standard SE cylinder will drift; you should evaluate the BSE rod-lock variant instead.
As a true ISO 15552 profile cylinder, the SE63X25S serves as a direct replacement for any standard 63 mm bore, 25 mm stroke ISO cylinder. It retains the standard PT3/8 port and M16x1.5 rod thread, ensuring your existing mounting hardware and tooling align without modification.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder outputs 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63X25S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other 63 mm ISO 15552 profile cylinders, matching the standard PT3/8 port and M16x1.5 rod thread without altering your mounting setup.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.