
The AirTAC SE63 Standard Cylinder SE63X275 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 275mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X275 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 mounting interfaces for universal hardware compatibility.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycles. This specific SKU is configured without a built-in magnet, meaning it is not equipped for CMSE or DMSE position sensing out of the box.
| Model | Airtac SE63 Standard Cylinder SE63X275 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Gates and diverts PET bottles on a high-speed packaging conveyor, utilizing the 1559 N push force to actuate heavy aluminum guide arms over the 275 mm stroke.
Pushes finished turned parts out of a CNC lathe spindle area into a collection chute, relying on the adjustable end cushions to soften stops at 800 mm/s.
Halts incoming empty pallets at a robotic pick station, using the 1402 N retract force to pull a mechanical stop clear of the transfer zone.
Generating 1559 N push at 0.5 MPa, this 63 mm bore sits perfectly between the 50 mm (982 N push) and 80 mm (2513 N push) options, allowing you to step down for lighter clamping or up for heavier lifting. Because this is a double-acting cylinder, it relies on continuous air pressure to hold position and will drift if supply is lost; use a BSE rod lock variant for fail-safe holding. With a 275 mm stroke, the 20 mm rod and M16x1.5 thread carry appreciable side load, so an external guide is recommended to prevent rod-bearing bending. As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 cylinders, matching the PT3/8 port and standard mounting accessories.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X275 generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N. The maximum operating pressure is 1.0 MPa, which yields a maximum push force of 318 kgf.
Yes, the SE63X275 features a standard ISO 15552 / VDMA 24562 profile body and mounting dimensions, making it dimensionally interchangeable with other ISO 15552 cylinders. It uses a PT3/8 port and a 20 mm rod, but note this specific unit lacks a sensor magnet for CMSE or DMSE switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.