
The AirTAC SE63 Standard Cylinder SE63X30 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 30mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X30 is a double-acting single-rod ISO 15552 profile cylinder with a 63 mm bore and 30 mm stroke. It generates 1559 N of push force and 1402 N of pull force at 0.5 MPa, making it well-suited for high-impact clamping and short-stroke ejection tasks. The square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames.
This unit features field-adjustable air cushioning at both ends to decelerate the piston near the stroke limits, reducing hard end-stop impact. Because this specific SKU lacks the -S magnet code, it does not support AirTAC CMSE or DMSE position sensors out of the box. It operates on filtered air at 30-800 mm/s, with a PT3/8 port and a 20 mm hard-chrome rod.
| Model | Airtac SE63 Standard Cylinder SE63X30 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Applies 1559 N of push force at 0.5 MPa to secure heavy cast iron engine blocks during high-speed CNC milling operations.
Uses the short 30 mm stroke to rapidly kick stamped sheet metal parts out of a die before the press ram returns.
Drives a mechanical arm to fold corrugated cardboard flaps on a high-speed packaging line, utilizing the adjustable cushion to soften the stroke end.
Selecting this 63 mm bore gives you 1559 N push at 0.5 MPa. If your application requires less force, the 50 mm bore provides 982 N push, whereas stepping up to the 80 mm bore yields 2513 N push for heavier loads. As a standard ISO 15552 profile cylinder, this unit is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to use existing mounting hardware like FA front flanges or TC center trunnions without redesigning the machine plate.
Keep in mind that a plain SE cylinder does not hold its position when air is exhausted or the valve is centered—the piston will drift. If your fixture must maintain a load without live pressure, you should integrate an external pilot-operated check valve or look at the BSE rod-lock variant. For this 30 mm stroke, the 20 mm rod and M16x1.5 thread provide excellent rigidity, so side-load bearing wear is minimal.
Quick checklist
At 0.5 MPa, the SE63X30 provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf when operating at the 1.0 MPa pressure limit.
Yes, it is dimensionally interchangeable per ISO 15552 standards, meaning it serves as a direct replacement for other ISO 15552 profile cylinders using standard mounting accessories. However, because this specific SKU lacks the -S magnet, you cannot mount AirTAC CMSE or DMSE position sensors to it without modifying the piston assembly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.