
The AirTAC SE63 Standard Cylinder SE63X300S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 300mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X300S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push force at 0.5 MPa. Driven by a Ø20 mm piston rod, it provides a 300 mm stroke and operates efficiently between 30-800 mm/s. The integrated -S magnet enables seamless positioning feedback when paired with AirTAC CMSE reed or DMSE electronic sensors.
Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The field-adjustable air cushioning at both end caps allows technicians to dial in deceleration via a set screw, softening hard mechanical stops during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X300S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 1559 N push force at 0.5 MPa to reliably swing a diverting arm on a 300 mm stroke, rerouting heavy wooden pallets between merging packaging lines.
Extends 300 mm to fold large corrugated box flaps at high cycling speeds, relying on the field-adjustable cushioning to prevent harsh impacts that could crush the cardboard.
Pushes raw steel bar stock into a lathe collet, using the built-in magnet and DMSE electronic sensor to confirm the 300 mm feed position before the chuck clamps.
This 63 mm bore generates 1559 N of push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N, while moving up to the 80 mm bore provides 2513 N. Because this model features a 300 mm stroke, the extended rod is susceptible to bending under heavy lateral loads; always support the load with an external guide to protect the rod bearing. As a dimensionally interchangeable ISO 15552 unit, it serves as a direct replacement for other ISO 15552 cylinders, matching the 63 mm bore, 300 mm stroke, PT3/8 port, and standard mounting accessories. Note that the adjustable cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure is lost.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X300S provides a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf when operated at the 1.0 MPa pressure limit.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke limits and does not function as a braking mechanism. If an application must hold a load without live air pressure, you should use an AirTAC BSE rod lock cylinder or install an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.