
The AirTAC SE63 Standard Cylinder SE63X300SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 300mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X300SH is a double-acting, single-rod ISO 15552 profile cylinder built for demanding 300 mm stroke applications. It generates 1559 N of push force and 1402 N of pull force at 0.5 MPa, extending to 2182 N at 0.7 MPa. The extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush on automated equipment.
This specific configuration includes a built-in magnet for CMSE and DMSE position sensing, plus an FKM (Viton) seal that extends the operating temperature range from -20 to +150 C. Field-adjustable air cushions at both ends allow you to tune end-of-stroke deceleration, protecting payloads from harsh mechanical impacts.
| Model | Airtac SE63 Standard Cylinder SE63X300SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of push force at 0.5 MPa to reliably eject hot plastic parts from injection molds, utilizing the FKM seal to withstand high-temperature ambient conditions.
Handles 300 mm stroke routing of heavy rubber or composite belts on high-temperature conveyor lines, where the Viton seal prevents thermal degradation.
Secures mid-sized machining pallets with 1402 N of pull force at 0.5 MPa, relying on the CMSE/DMSE magnet for precise end-position confirmation in CNC cells.
If sizing this 63 mm bore actuator, compare it to its neighbors: the 50 mm bore yields 982 N push at 0.5 MPa for lighter loads, while the 80 mm bore provides 2513 N for heavier lifting. Because this is a 300 mm stroke, the unsupported piston rod is prone to bending under lateral stress; always use an external guide to prevent side-load damage to the rod bearing. Note that the air cushion only decelerates the piston near stroke end and does not lock the load—if air pressure drops, the cylinder will drift. For position holding, consider a BSE rod lock. As a true ISO 15552 profile cylinder, it offers dimensional interchangeability for seamless retrofits using standard PT3/8 ports and M16x1.5 rod threads.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder delivers 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at 30-800 mm/s with a PT3/8 port.
Yes. The SE63X300SH is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and PT3/8 port locations for direct replacement, though you must verify your existing rod thread matches M16x1.5.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.