
The AirTAC SE63 Standard Cylinder SE63X304S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 304mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X304S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull force, making it highly capable for mid-range actuation. The extruded aluminum barrel lacks external tie rods, which streamlines the exterior and prevents debris accumulation in tight machinery layouts.
Equipped with a built-in magnet, this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, effectively mitigating impact wear without relying on fixed rubber bumpers.
| Model | Airtac SE63 Standard Cylinder SE63X304S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 304 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×304 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Driving the folding mechanism on a continuous-motion carton erector, where 1559 N of push force reliably creases heavy cardboard at 304 mm stroke distance.
Actuating a routing diverter arm on a high-speed conveyor network, using the 304 mm extension to fully shift heavy pallets between parallel transport lanes.
Indexing a tool carousel in a machining center, relying on the built-in -S magnet and DMSE solid-state sensors to confirm turret position before spindle engagement.
When sizing this 63 mm bore actuator, evaluate your force margins carefully. If 1559 N of push at 0.5 MPa is excessive, stepping down to the 50 mm bore yields 982 N, whereas upgrading to the 80 mm bore provides 2513 N for heavier payloads. Because this model features a 304 mm stroke, the 20 mm rod and internal bearing face increased bending moments under lateral stress; incorporating an external guide rail is strongly advised to prevent premature wear.
For direct retrofits, the SE63X304S is dimensionally interchangeable per ISO 15552 standards, matching competitor mounting footprints directly. Specify the PT3/8 port, your required mounting accessory (such as FA or TC), and ensure you order the -S magnet option for CMSE or DMSE sensor compatibility. Note that the adjustable cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure is lost.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X304S delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N, with an absolute maximum push of 318 kgf at 1.0 MPa. This 63 mm bore cylinder utilizes a PT3/8 pneumatic port and operates at speeds between 30-800 mm/s.
Yes, the SE63X304S is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing direct replacement using existing mounting hardware. However, it is a standard double-acting cylinder; the adjustable air cushions only decelerate the piston near stroke end and do not function as a locking mechanism to hold loads if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.