
The AirTAC SE63 Standard Cylinder SE63X30H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 30mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X30H is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding thermal environments. Delivering 1559 N of push force at 0.5 MPa, this 63mm bore unit utilizes a specialized FKM (Viton) seal to operate in temperatures up to 150 C. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery.
Because this specific SKU lacks the -S magnet code, it is not equipped for direct CMSE or DMSE position sensing. Instead, it relies on field-adjustable pneumatic cushioning at both ends, allowing technicians to tune the end-of-stroke deceleration via a screw to prevent harsh impacts at high cycling speeds.
| Model | Airtac SE63 Standard Cylinder SE63X30H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles the rapid, high-temperature core pulling on injection molding presses where ambient heat degrades standard seals, utilizing the 1559 N push force and 30mm stroke.
Ejects stamped components from warm dies, leveraging the 150 C FKM seal to maintain integrity during continuous thermal exposure.
Secures products passing through shrink-wrap heat tunnels, where the 63mm bore provides firm holding force and the Viton seal resists ambient radiated heat.
When sizing this 63mm bore unit, consider stepping down to the 50mm bore for lighter loads, which provides 982 N of push at 0.5 MPa, or stepping up to the 80mm bore for heavier demands, which yields 2513 N at 0.5 MPa. Keep in mind that a standard SE cylinder does not hold its position if air pressure is lost or the valve is centered; the piston will drift. If your process requires static load holding without live pressure, explore the BSE rod-lock variant. For retrofitting, this cylinder is dimensionally interchangeable with any ISO 15552 cylinder sharing the 63mm footprint, 30mm stroke, and PT3/8 porting.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63mm bore cylinder provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. Thanks to the H-code FKM seal, it operates from -20 to 150 C.
Yes, the SE63X30H is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounting hardware matching the 63mm bore, 30mm stroke, and PT3/8 port interface without machining changes.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.