verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X320

The AirTAC SE63 Standard Cylinder SE63X320 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 320mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke320 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$120.00 $127.50Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X320

The AirTAC SE63X320 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa across a 320 mm stroke. Its extruded aluminum body omits external tie rods, yielding a flush, corrosion-resistant housing that mounts cleanly in tight machine envelopes. This design also features sensor grooves on three sides, though this specific SKU lacks the built-in position magnet.

Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at speeds up to 800 mm/s. The 63 mm bore pairs a 20 mm hard-chrome rod with an M16x1.5 thread and PT3/8 ports, providing a robust interface for demanding industrial cycles.

Airtac SE63 Standard Cylinder SE63X320 Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X320
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke320 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X320

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×320Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X320 Is Used

conveyor_belt

Pallet Diverting Gate

Actuates a routing flap on a 50 kg pallet conveyor line, utilizing the 320 mm stroke to fully open the lane diverter while absorbing the kinetic impact via adjustable cushioning.

packaging

Corrugated Box Flap Folder

Drives the mechanical folder arms on a case erector, applying 1559 N of push to cleanly fold heavy cardboard flaps without crushing the carton structure.

factory

Injection Mold Platen Ejector

Pushes a secondary ejector plate to free cooled plastic parts from the mold cavity, relying on the 20 mm rod to withstand the high extraction resistance.

Is the Airtac SE63 Standard Cylinder SE63X320 the Right Cylinder?

Selecting the SE63X320 is appropriate when your application requires roughly 1559 N of push force at 0.5 MPa. If your load is lighter, stepping down to the 50 mm bore yields 982 N of push, conserving air volume. Conversely, heavier payloads justify stepping up to the 80 mm bore, which provides 2513 N of push. Because this unit has no -S magnet, position sensing is not available out of the box; if your sequence requires end-of-stroke feedback, specify the SE63XS variant instead.

At 320 mm of stroke, the unsupported 20 mm rod is subject to bending moments under side loads, so an external guide rail is strongly recommended to prevent premature rod-seal wear. Furthermore, this cylinder relies on live air pressure to maintain its position; if air is lost or the valve centers, the piston will drift. For applications requiring static load holding without continuous pressure, consider the BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for comparable standardized housings using standard mounting accessories like FA or LB.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X320 FAQ

At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

No, the SE63X320 is a standard double-acting cylinder and will drift if air is lost or the valve is centered. The adjustable air cushioning only decelerates the piston near the stroke ends and does not function as a brake. For load-holding requirements, use a BSE rod lock cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X320

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X320 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.