verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X330S

The AirTAC SE63 Standard Cylinder SE63X330S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 330mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke330 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$124.66 $132.16Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X330S

The AirTAC SE63X330S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Driven by filtered air, it operates seamlessly between 0.15-1.0 MPa and features a Ø20 mm hard-chrome rod with an M16x1.5 thread.

This unit incorporates a built-in magnet for CMSE and DMSE position sensing, allowing precise end-of-stroke detection in automated sequences. The extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush, while the field-adjustable pneumatic cushioning at both ends lets you tune deceleration to soften hard end stops at speed.

Airtac SE63 Standard Cylinder SE63X330S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X330S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke330 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X330S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×330Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X330S Is Used

conveyor_belt

Pallet Diverting Gate

Leverages the 1559 N push force and 330 mm stroke to extend a diverter arm, smoothly redirecting heavy pallets between adjacent packaging lines without pneumatic lag.

packaging

Case Erector Flap Folding

Uses the integrated -S magnet with DMSE sensors to time the 330 mm extension perfectly, folding cardboard carton flaps at high cycle rates while the adjustable cushion prevents harsh impact.

straighten

Automotive Press Unloading

Employs the 2182 N push at 0.7 MPa to push stamped metal brackets out of a forming die, utilizing the no-tie-rod profile to mount flush against the press framework.

Is the Airtac SE63 Standard Cylinder SE63X330S the Right Cylinder?

When sizing this 63 mm bore actuator, you can step down to the 50 mm bore for lighter loads requiring 982 N push at 0.5 MPa, or step up to the 80 mm bore for heavier tasks needing 2513 N push. As a true ISO 15552 profile cylinder, the SE63X330S is dimensionally interchangeable with other ISO 15552 cylinders, ensuring a direct retrofit using standard FA, LB, or TC mounting hardware and a PT3/8 port.

Because the 330 mm stroke exceeds the 300 mm threshold, the unsupported rod length increases the risk of rod-bearing bending under lateral stress; for offset loads, implement an external guide rail to prevent premature wear. Remember that a plain SE cylinder does not hold its position when air is lost or the valve is centered—the piston will drift—so if your application requires dead-load holding, explore the BSE rod lock variant.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X330S FAQ

At 0.5 MPa, the 63 mm bore provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The fluid port size is PT3/8.

Yes, the SE63X330s is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders using standard mounting hardware. It features field-adjustable air cushioning at both ends, allowing you to tune the screw to soften end stops; however, this only decelerates the piston and does not lock or hold the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X330S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X330S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.