
The AirTAC SE63 Standard Cylinder SE63X350S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 350mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X350S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push at 0.5 MPa and a 2182 N push at 0.7 MPa across a 350 mm stroke. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing the standardized ISO 15552 footprint for universal hardware interchangeability.
This specific configuration includes a built-in magnet (-S) for direct switching with AirTAC CMSE reed or DMSE electronic sensors, fitting neatly into the three integrated sensor grooves. The cylinder relies on a field-adjustable pneumatic cushion at both ends—tuned via a set screw to soften end-of-stroke impacts rather than acting as a fixed bumper.
| Model | Airtac SE63 Standard Cylinder SE63X350S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push force at 0.5 MPa to positively deflect heavy wooden pallets running at 30-800 mm/s onto secondary packaging lines.
Leverages the 350 mm stroke to open and close carton forming jaws, relying on the adjustable end cushions to prevent hard slamming at cycle limits.
Pushes formed sheet metal parts out of progressive dies, utilizing the -S magnet and DMSE electronic sensors to confirm full ejection before the press cycles.
Selecting this 63 mm bore makes sense when a 50 mm cylinder (982 N push @0.5 MPa) is underpowered, but an 80 mm unit (2513 N push @0.5 MPa) would be physically oversized. Because the 350 mm stroke generates significant leverage, the Ø20 mm piston rod and its M16x1.5 thread will experience side-load bending; an external guide rail is strongly recommended to prevent premature rod-bearing wear. As a standard ISO 15552 profile cylinder with a PT3/8 port, it serves as a direct dimensional replacement for competing ISO 15552 cylinders, though it will drift if air pressure is lost and cannot hold a load without a BSE rod lock.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the SE63X350S is a standard double-acting cylinder and will drift if air pressure is lost or the valve is centered. Its adjustable air cushions only decelerate the piston near stroke end and do not function as a mechanical brake. For position holding, consider an AirTAC BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.