
The AirTAC SE63 Standard Cylinder SE63X350SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 350mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X350SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous automation environments. It delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull force, making it well-suited for mid-weight industrial manipulation. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
Equipped with a high-temperature FKM seal, this specific configuration reliably operates from -20 to +150 C, accommodating hot-end manufacturing processes that would degrade standard elastomers. The integrated magnet (-S) directly supports position sensing via AirTAC CMSE reed or DMSE electronic switches fitted into the multiple sensor grooves machined along the barrel. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration, smoothly absorbing kinetic energy rather than relying on a harsh fixed bumper.
| Model | Airtac SE63 Standard Cylinder SE63X350SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leverages the 1559 N push force at 0.5 MPa to positively redirect heavy wooden pallets traveling on high-speed packaging conveyors without rebound.
The FKM high-temperature seal survives ambient heat near molding presses, while the 350 mm stroke reaches deep into tooling to extract finished plastic parts.
Utilizes the integrated magnet for DMSE electronic timing to verify stroke completion when pressing corrugated carton flaps during high-temperature adhesive application.
When sizing this actuator, evaluate your kinetic energy against the 350 mm stroke length. If the SE63X350SH provides excessive thrust (1559 N push at 0.5 MPa), stepping down to the 50 mm bore reduces the output to 982 N. Conversely, if the load stalls, stepping up to the 80 mm bore increases the push capability to 2513 N. Because this model features a 350 mm stroke, the extended rod is susceptible to bending under heavy lateral loads; always incorporate an external guide rail to prevent rod-bearing damage. As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard 63 mm bore, 350 mm stroke unit with PT3/8 ports and matching mounting accessories. Remember that the adjustable air cushion only decelerates the piston near stroke end and does not hold the load; if air pressure drops, the rod will drift, necessitating a BSE rod lock for fail-safe positioning.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. Thanks to the H seal option, it operates in temperatures up to 150 C.
Yes, the SE63X350SH is dimensionally interchangeable per ISO 15552. You can drop it directly into existing mounts for any standard 63 mm bore, 350 mm stroke cylinder, matching the PT3/8 port and M16x1.5 rod thread. The -S magnet also works seamlessly with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.