verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X435S

The AirTAC SE63 Standard Cylinder SE63X435S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 435mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke435 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$139.08 $146.58Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X435S

The AirTAC SE63X435S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding automation. It generates 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa, utilizing a 63 mm bore and a 435 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 dimensions for direct interchangeability.

This specific unit includes a built-in magnet (-S) for non-contact position sensing with AirTAC CMSE reed or DMSE electronic switches. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical impacts during high-speed actuation.

Airtac SE63 Standard Cylinder SE63X435S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X435S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke435 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X435S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×435Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X435S Is Used

conveyor_belt

Pallet Diverters

Leverages the 1559 N push force and 435 mm stroke to redirect heavy pallets across transfer lines without stalling mid-cycle.

packaging

Case Erector Jaws

Utilizes the adjustable end cushions to smoothly bring fast-moving forming jaws to a halt, preventing cardboard crushing at cycle end.

straighten

Press Brake Ejection

Employs the built-in magnet and CMSE sensor to confirm full retraction of metal ejection pins before a press brake closes.

Is the Airtac SE63 Standard Cylinder SE63X435S the Right Cylinder?

At 0.5 MPa, this 63 mm bore yields 1559 N of push force. If your application requires less force, the neighboring 50 mm bore provides 982 N of push, whereas stepping up to the 80 mm bore increases output to 2513 N. Because this is a standard double-acting cylinder, it cannot hold a load or maintain position if air pressure is lost or the valve is centered; the piston will drift. For suspended load-holding requirements, consider the AirTAC BSE series with an integrated rod lock.

The 435 mm stroke is a made-to-order length exceeding the 400 mm standard increment. With a 20 mm rod and M16x1.5 thread, strokes of this length place significant bending moments on the rod bearing during side-loaded retraction. To prevent premature seal wear and bushing failure, implement an external guide rail to support the load and absorb radial forces.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X435S FAQ

The SE63X435S provides 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, with an absolute maximum push of 318 kgf at 1.0 MPa. The 435 mm stroke is a non-standard, made-to-order length.

Yes, the SE63X435S is dimensionally interchangeable per ISO 15552 standards. You can drop it directly into existing ISO 15552 mounting hardware without modifying the footprint, and it uses a PT3/8 port.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X435S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X435S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.