
The AirTAC SE63 Standard Cylinder SE63X500 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X500 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal pneumatics.
This 63 mm bore unit features field-adjustable air cushioning at both ends to soften hard end-stops over its 500 mm stroke. Note that this specific SKU lacks a built-in magnet, so it cannot host CMSE or DMSE position sensors without modification.
| Model | Airtac SE63 Standard Cylinder SE63X500 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Redirects heavy pallets on a 500 mm stroke using 1559 N of push force, leveraging the extruded profile body for flush frame mounting.
Folds large carton flaps over a half-meter travel distance, relying on adjustable end-cushioning to prevent crushing the board.
Opens and closes a metal chip gate on a machining center, utilizing the 63 mm bore's 318 kgf maximum thrust to move jammed debris.
If 1559 N extend thrust is insufficient, stepping up to the 80 mm bore yields 2513 N at 0.5 MPa; conversely, dropping to the 50 mm bore provides 982 N for lighter loads. Because this SKU omits the -S magnet, adding position sensing requires specifying a model with that option or using external switches.
Spanning 500 mm, this cylinder's Ø20 mm rod and M16x1.5 thread endure moderate side loads, but an external guide is strongly recommended to prevent rod-bearing bending. As a standard ISO 15552 profile body, it serves as a direct dimensional replacement for competing cylinders sharing the PT3/8 port and standardized mounting interface. Remember that the adjustable cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure drops.
Quick checklist
The SE63X500 generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It features a PT3/8 port and a 500 mm stroke.
Yes, its standardized ISO 15552 mounting interface allows direct dimensional interchangeability with other profile cylinders. However, it cannot hold a vertical load without live air pressure; the adjustable cushion only decelerates motion near the stroke end and acts as no brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.