verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X500SH

The AirTAC SE63 Standard Cylinder SE63X500SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke500 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$159.55 $167.05Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X500SH

The AirTAC SE63X500SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous linear motion. It delivers a robust 1559 N push force at 0.5 MPa alongside a 500 mm stroke, making it well-suited for heavy-duty positioning tasks. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.

This specific configuration integrates a high-temperature FKM (Viton) seal, extending the operating thermal envelope from -20 to +150 C for demanding environments. The built-in magnetic piston (-S) pairs directly with AirTAC CMSE reed and DMSE electronic sensors, which seat cleanly into the sensor grooves machined on three sides of the body.

Airtac SE63 Standard Cylinder SE63X500SH Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X500SH
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke500 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X500SH

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×500Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X500SH Is Used

conveyor_belt

Pallet Diverters

Leverages the 1559 N push force to positively divert heavy pallets running at high throughput on packaging lines, utilizing the 500 mm stroke to clear the conveyor width completely.

factory

Injection Mold Ejection

The Viton FKM seal withstands ambient heat radiating from mold platens up to 150 C, while the 20 mm rod reliably pushes finished parts clear of the tooling cavity.

science

Industrial Drying Ovens

Extends a 500 mm stroke to draw material racks through high-temperature curing zones, relying on the high-temp seal and integrated DMSE electronic sensors for precise positioning.

Is the Airtac SE63 Standard Cylinder SE63X500SH the Right Cylinder?

Selecting the SE63X500SH is ideal when your application requires sustained mid-range thrust across a half-meter stroke. If your load demands less force, stepping down to the 50 mm bore drops the 0.5 MPa push output to 982 N, whereas upgrading to the 80 mm bore raises it to 2513 N for heavier payloads. Because this 500 mm stroke generates significant leverage, long unsupported piston travel can induce rod-bearing bending; always utilize an external guide to prevent premature wear. This unit serves as a direct replacement for any ISO 15552 cylinder, matching the 63 mm footprint, PT3/8 port, and standardized mounting accessories.

Remember that the field-adjustable air cushion at both ends only decelerates the piston near the stroke limits to soften end-stop impact. It does not function as a locking mechanism. If your process must hold a vertical load securely without live air pressure, you must integrate an external pilot-operated check valve or specify a BSE rod-lock variant.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X500SH FAQ

At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with an absolute maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range spans 30-800 mm/s.

Yes, the SE63X500SH is dimensionally interchangeable per ISO 15552. It shares the standardized mounting interface and PT3/8 port size, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders without altering your existing mounting hardware.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X500SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X500SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.