
The AirTAC SE63 Standard Cylinder SE63X50S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 50mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X50S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Driven by a 63 mm bore and a 50 mm stroke, it provides robust linear motion for mid-range industrial tasks. The integrated -S magnet allows seamless position detection using AirTAC CMSE reed or DMSE electronic sensors along the extruded aluminum barrel.
Unlike traditional tie-rod designs, this profile cylinder utilizes a square extruded barrel without external tie rods, making it highly compact and corrosion-resistant while allowing accessories to mount flush. The field-adjustable air cushion at both ends is a real pneumatic deceleration mechanism, not a fixed rubber bumper, letting technicians dial in end-of-stroke softness to absorb the 318 kgf maximum kinetic energy at 1.0 MPa.
| Model | Airtac SE63 Standard Cylinder SE63X50S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of push force at 0.5 MPa to eject stamped sheet metal parts from progressive die sets, utilizing the 36 mm cushion length to soften hard end stops.
Uses the built-in magnet with DMSE electronic sensors to trigger rapid 50 mm diverting strokes on a packaging conveyor, routing glass bottles at 30-800 mm/s.
Generates 1402 N of retract force to pull back a pneumatic chuck actuator on a CNC lathe, relying on the no-tie-rod profile to fit cleanly within the machine enclosure.
Choose this 63 mm bore when you need 1559 N push at 0.5 MPa. If your load is lighter, step down to the 50 mm bore which provides 982 N push; if you need more power, step up to the 80 mm bore yielding 2513 N push. Remember that a plain SE cylinder does not hold its load when air is lost—the piston will drift—so use a BSE rod lock for fail-safe holding. For ISO 15552 dimensional interchangeability, match the 63 mm bore, 50 mm stroke, PT3/8 port, and the -S magnet requirement when sourcing replacements.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63X50S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it in using the same mounting footprint and PT3/8 port threads, provided your application uses a 63 mm bore and 50 mm stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.