verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X50SFTC

The AirTAC SE63 Standard Cylinder SE63X50SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 50mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke50 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$107.91 $115.41Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X50SFTC

The AirTAC SE63X50SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 63 mm bore and a 50 mm stroke. In this configuration it generates 1559 N of push force and 1402 N of pull force at 0.5 MPa, peaking at a 318 kgf maximum thrust at 1.0 MPa. The extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.

This specific unit includes an FTC center trunnion mounting accessory and a built-in magnet (-S) for position sensing. The magnet directly interfaces with AirTAC CMSE reed and DMSE electronic switches dropped into the three-sided sensor groove. Field-adjustable pneumatic cushioning at both ends allows you to tune the end-of-stroke deceleration via a setscrew, softening hard mechanical stops during high-speed 30-800 mm/s cycling.

Airtac SE63 Standard Cylinder SE63X50SFTC Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X50SFTC
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke50 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X50SFTC

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×50Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X50SFTC Is Used

packaging

Carton Erector Flaps

Provides the exact 1559 N push at 0.5 MPa needed to fold and tuck heavy cardboard flaps during high-speed case erector operations.

straighten

Press Brake Backgauge

Uses the 50 mm stroke and FTC trunnion mount to rapidly position sheet metal backgauges with repeatable precision.

factory

Injection Mold Ejector

Delivers rapid 30-800 mm/s retraction via the DMSE sensor magnet to clear injection molded parts before the press opens.

Is the Airtac SE63 Standard Cylinder SE63X50SFTC the Right Cylinder?

If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, while moving up to the 80 mm bore provides 2513 N. This 63 mm bore features a PT3/8 port, a Ø20 mm rod with an M16x1.5 thread, and a 36 mm cushion length. Because the FTC mount allows pivoting, ensure the trunnion pin is sized for the 318 kgf maximum load.

As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, making it a direct retrofit using existing mounting hardware. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If unpowered air loss occurs, the rod drifts, requiring a BSE rod lock for secure positioning.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X50SFTC FAQ

At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force is 2182 N. The maximum push force is 318 kgf at 1.0 MPa. This 63 mm bore cylinder uses a PT3/8 port.

Yes. The SE63X50SFTC is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounting hardware, and the built-in -S magnet works directly with AirTAC CMSE and DMSE sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X50SFTC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X50SFTC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.