
The AirTAC SE63 Standard Cylinder SE63X55 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 55mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X55 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its extruded aluminum barrel lacks external tie rods, yielding a smooth, flush surface that resists corrosion and simplifies flush mounting on machinery frames.
This 63 mm bore unit features a PT3/8 port and a 20 mm rod, and relies on field-adjustable pneumatic cushioning at both ends to decelerate the piston near the stroke limits. Note that this specific SKU lacks a built-in magnet, meaning it is not wired for CMSE or DMSE position sensing out of the box.
| Model | Airtac SE63 Standard Cylinder SE63X55 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates routing gates on high-speed beverage bottling lines, using its 1559 N push force to reliably shift heavy lane guides during continuous production runs.
Drives secondary pneumatic tailstock or bar feeder mechanisms on CNC lathes, where the compact tie-rod-free profile allows tight clearance within the machine enclosure.
Folds heavy cardboard flaps on automated packaging machines, benefiting from the 36 mm adjustable cushion stroke to soften impacts at the end of each 55 mm cycle.
Operating at 1559 N push at 0.5 MPa, this 63 mm bore is a robust middleweight. If your application requires less force, the 50 mm bore provides 982 N push, while stepping up to the 80 mm bore yields 2513 N. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure drops; for position-holding safety, consider the BSE rod-lock variant. As a true ISO 15552 cylinder, it serves as a direct replacement for any standard 63 mm bore, 55 mm stroke ISO 15552 cylinder using existing mounting hardware and PT3/8 ports.
Quick checklist
The SE63X55 generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 cylinders, allowing a direct retrofit using standard mounting accessories. However, because this specific SKU lacks the built-in magnet (-S option), it cannot support CMSE or DMSE position sensors without upgrading to a magnetized model.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.