
The AirTAC SE63 Standard Cylinder SE63X600 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X600 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push force at 0.5 MPa and a maximum output of 318 kgf at 1.0 MPa. Its extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that naturally resists corrosion and simplifies sensor placement along three integrated grooves.
This 63 mm bore unit features a 600 mm stroke and relies on a field-adjustable pneumatic cushion at both ends to decelerate the piston near stroke extremes, letting technicians dial out harsh end-stop impacts at speed. Note this specific SKU lacks the built-in magnet, so it is not wired for CMSE or DMSE position sensing without modification.
| Model | Airtac SE63 Standard Cylinder SE63X600 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 600 mm stroke to push heavy timber pallets off a main conveyor line, relying on the 1559 N push force to overcome friction without stalling.
Drives a long mechanical arm to fold large corrugated carton flaps, where the adjustable end cushion softens the impact at high cycling speeds.
Positions heavy steel door panels within a robotic weld cell, taking advantage of the 318 kgf max thrust to seat parts firmly against locators.
If 1559 N of push at 0.5 MPa is too much for your fixture, stepping down to the 50 mm bore drops the output to 982 N, while moving up to the 80 mm bore raises it to 2513 N. Because this is a standard double-acting cylinder, it will drift and cannot hold a load if air pressure drops or the valve centers—use a BSE rod lock for fail-safe positioning.
At 600 mm of stroke, the 20 mm rod and internal bearing face higher bending moments under side loads; always support the payload with an external linear guide to prevent binding. As a dimensionally interchangeable ISO 15552 actuator, it serves as a direct replacement for other ISO 15552 cylinders, utilizing standard mounting hardware and a PT3/8 port.
Quick checklist
At 0.5 MPa, the SE63X600 provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force is 2182 N, and the maximum push force is 318 kgf at 1.0 MPa.
Yes, the SE63X600 is dimensionally interchangeable per ISO 15552, meaning it shares standard mounting footprint and port dimensions to serve as a direct replacement for other ISO 15552 profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.