
The AirTAC SE63 Standard Cylinder SE63X600S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 600mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X600S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 dimensions for universal retrofitting.
Equipped with a built-in magnet (S option), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tailor deceleration via a set screw, softening hard end stops during high-speed 600 mm strokes without relying on fixed rubber bumpers.
| Model | Airtac SE63 Standard Cylinder SE63X600S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanisms on automated packaging lines, utilizing the 1559 N push force and 600 mm stroke to erect large shipping cartons at high cycling speeds.
Actuates diverter arms on heavy-duty roller conveyors, relying on the adjustable end cushions to softly decelerate the 600 mm travel without slamming the mechanism.
Clears molded plastic parts from injection machinery, where the built-in S magnet triggers DMSE solid-state sensors to confirm full retraction before the press closes.
When sizing this 63 mm bore actuator, evaluate your thrust requirements against its 1559 N push at 0.5 MPa. If your assembly requires less force, stepping down to the 50 mm bore yields 982 N of push, while moving up to the 80 mm bore provides 2513 N for heavier payloads. Keep in mind that a standard SE cylinder will drift if air pressure is lost or a valve centers; for fail-safe load holding on a 600 mm stroke, consider the BSE rod-lock variant or an external pilot-operated check valve.
Because this 600 mm stroke generates significant leverage, an external guide is strongly recommended to prevent rod-bearing bending under side loads. For a direct replacement, match the 63 mm bore, 600 mm stroke, PT3/8 port, and your required mounting accessory, ensuring the -S magnet is specified for CMSE or DMSE sensor compatibility.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The absolute maximum push capacity is 318 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE63X600S is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using the same 63 mm bore, 600 mm stroke, and PT3/8 port configuration without altering the existing mounting footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.