
The AirTAC SE63 Standard Cylinder SE63X610S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 610mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X610S is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 dimensional standard. It features a square extruded aluminum barrel without external tie rods, making it compact and highly resistant to corrosion while allowing flush mounting on machinery. Delivering a robust 1559 N push force at 0.5 MPa, this 63 mm bore unit is equipped with a built-in magnet for non-contact position sensing.
Because the 610 mm stroke exceeds the standard 1500 mm maximum for this bore, it is manufactured as a non-standard made-to-order configuration. It integrates field-adjustable air cushioning at both ends to decelerate the piston smoothly, and its three-sided sensor grooves readily accept CMSE reed and DMSE electronic switches.
| Model | Airtac SE63 Standard Cylinder SE63X610S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 610 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×610 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force required to actuate heavy cardboard flap folders on automated palletizing lines over its 610 mm travel.
Uses the extended 610 mm stroke and built-in magnet to push heavy timber or metal profiles between conveyor belts reliably.
Handles the 610 mm stroke deployment of heavy dyeing jigs in textile machinery, leveraging the adjustable cushion to stop high-inertia loads gently.
This 63 mm bore generates 1559 N push at 0.5 MPa, sitting between the 50 mm bore (982 N push) and the 80 mm bore (2513 N push) for scaling your actuation force up or down. Since this is a 610 mm stroke, the unsupported rod length increases susceptibility to bending under side loads; utilizing an external guide mechanism is strongly recommended to prevent premature rod-bearing wear.
As a standard ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 cylinders, sharing identical mounting footprints and port sizes (PT3/8). Note that a plain SE cylinder will drift if air pressure is lost or the valve is centered; if your application requires strict position holding without live pressure, consider the AirTAC BSE rod lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X610S delivers a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force is 2182 N, and it reaches a maximum push of 318 kgf at 1.0 MPa.
Yes, the SE63X610S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting interface and PT3/8 port locations as other standard profile cylinders, allowing for a seamless direct retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.