
The AirTAC SE63 Standard Cylinder SE63X620S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 620mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X620S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa and a maximum thrust of 318 kgf at 1.0 MPa. Driven by a 63 mm bore and a 620 mm stroke, this extruded aluminum barrel design eliminates external tie rods entirely, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific unit includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. To protect the piston at high cycling speeds, field-adjustable pneumatic cushioning at both ends allows you to dial in the exact deceleration needed to soften hard end stops.
| Model | Airtac SE63 Standard Cylinder SE63X620S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 620 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×620 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 620 mm stroke to push heavy pallets cleanly off a main conveyor belt, relying on the 1559 N push force to overcome side friction without stalling.
Extends fully across wide packaging stations to tuck large cardboard flaps, using the adjustable end cushions to prevent tearing the material at high speed.
Acts as an automated safety gate actuator on a bar feeder, where the -S magnet triggers DMSE electronic sensors to confirm the guard is fully open before machining cycles start.
Choosing this 63 mm bore makes sense when the 50 mm bore (982 N push at 0.5 MPa) is underpowered, but the 80 mm bore (2513 N push at 0.5 MPa) would be physically oversized and consume too much compressed air. Because this is a standard double-acting cylinder, it will drift if air supply is lost or the valve centers; if your application demands true mid-stroke holding, specify a BSE rod lock variant or an external pilot-operated check valve.
With a 620 mm stroke, the 20 mm rod and its M16x1.5 thread face significant bending moments under side loads. Always mount an external guide to prevent rod-bearing damage and ensure smooth operation. As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 cylinders, utilizing the same PT3/8 port and standardized mounting hardware.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf when operating at the 1.0 MPa pressure limit.
No. The adjustable air cushions at both ends only decelerate the piston near stroke end; they do not lock the rod. If power or air is lost, the cylinder will drift. For true load holding, use a BSE rod lock cylinder or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.