
The AirTAC SE63 Standard Cylinder SE63X630S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 630mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X630S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. Delivering a robust 1559 N push force at 0.5 MPa, it utilizes a 63 mm bore and a 630 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a sleek, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
Equipped with a built-in magnet (-S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a set screw, effectively softening hard end stops during high-speed 30-800 mm/s operations.
| Model | Airtac SE63 Standard Cylinder SE63X630S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 630 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×630 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 630 mm stroke and 1559 N push force to extend and divert heavy loaded pallets onto secondary packaging conveyors without mechanical binding.
Provides reliable ejection of stamped metal panels from hydraulic presses, utilizing the 36 mm adjustable cushion to halt the 20 mm rod smoothly under high kinetic energy.
Raises and lowers security mesh gates on automated storage aisles, relying on the -S magnet and DMSE sensors to confirm full open and closed positions.
Selecting the SE63X630S provides 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push, while stepping up to the 80 mm bore provides 2513 N. Because this cylinder lacks a rod lock, the piston will drift if air pressure is lost or the valve is centered; for position-holding safety, consider the BSE rod-lock variant or an external pilot-operated check valve.
For a direct retrofit, this model is dimensionally interchangeable with other ISO 15552 cylinders, utilizing a PT3/8 port, M16x1.5 rod thread, and standard mounting accessories. At 630 mm of stroke, the unsupported piston rod is highly susceptible to bending under side loads; an external guide rail must be used to prevent premature rod-bearing wear.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X630S provides 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It features a 63 mm bore, 630 mm stroke, PT3/8 port, and operates at speeds of 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and hardware of other ISO 15552 profile cylinders. However, it does not hold loads pneumatically; if air is lost, the piston drifts, requiring a BSE rod lock for safety.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.