
The AirTAC SE63 Standard Cylinder SE63X640S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 640mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X640S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding industrial automation. It features a square extruded aluminum barrel without external tie rods, offering a compact, corrosion-resistant body that mounts flush against machine frames. Delivering a robust 1559 N push force at 0.5 MPa, this 63 mm bore unit is built for rigorous cyclic operation.
This 640 mm stroke model includes a built-in magnet (-S) compatible with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-travel detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration via a set screw, effectively absorbing kinetic energy to prevent impact wear during high-speed 30-800 mm/s cycles.
| Model | Airtac SE63 Standard Cylinder SE63X640S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 640 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×640 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 640 mm stroke to push heavy pallets sideways onto parallel roller conveyors, leveraging the 1559 N push force to overcome friction without stalling.
Extends fully to fold large corrugated carton flaps during case erecting, relying on the field-adjustable cushioning to soften the end-stop impact during fast 800 mm/s cycling.
Actuates the guide gate for automated bar feeding machines, utilizing the built-in magnet and DMSE electronic sensors to confirm gate position for the safety controller.
Delivering 1559 N push at 0.5 MPa, this 63 mm bore cylinder fits mid-range actuation needs. If your application requires less force, the 50 mm bore provides 982 N push, while stepping up to the 80 mm bore yields 2513 N for heavier payloads. Because this model uses a 640 mm stroke, the extended piston rod is highly susceptible to bending under side loads; always incorporate an external guide or linear rail to prevent rod-bearing damage. As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard ISO 15552 cylinder, matching the PT3/8 port, 640 mm stroke, and standard mounting interface. Note that the adjustable air cushion only decelerates the piston near stroke end and does not hold a load if air pressure is lost.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The 63 mm bore generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. The fluid port size is PT3/8.
No, the adjustable air cushion only decelerates the piston near the stroke ends and is not a locking mechanism. If the air supply is lost or exhausted, the piston will drift. For position holding, consider the AirTAC BSE rod lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.